9 Best DIY Reverse Osmosis Systems (November 2026)
The best best DIY reverse osmosis systems include the iSpring RCC2AK-UV for easy install, the iSpring RCC7AK-BN for certified filtration, and the Aquatic Life RO Buddie 4-Stage Aquarium Water for aquariums.
On this page (9 sections)
- Which DIY reverse osmosis systems suit which home
- How these DIY systems were compared
- Can you install a DIY reverse osmosis system with no plumbing experience?
- How much water output do you need from a DIY RO system?
- Should you pick a tank or tankless DIY reverse osmosis system?
- What should you check before buying a DIY RO system?
- What changes with an aquarium or a low-salt diet?
- How long will your DIY reverse osmosis system last?
- Verdict: which best DIY reverse osmosis system should you buy?
The best DIY reverse osmosis system for most homes is the iSpring RCC2AK-UV, because its top-mounted faucet fastener lets you finish the install from above the sink instead of lying on your back in the cabinet. It also delivers 200 gallons per day and re-mineralizes the water before it reaches your glass.
If you want a whole system with NSF/ANSI 58 certification, the iSpring RCC7AK-BN is the safer pick. Neither unit needs electricity, so a kitchen outlet is one less thing to plan around.
This guide covers 9 systems we compared on install method, output, drain ratio and filter stages. Every under-sink pick here is a kit you plumb into the cold water line yourself.
Our picks at a glance
Which DIY reverse osmosis systems suit which home
Every pick here shares one trait: you can install it without paying a plumber. What changes is the work involved, the cabinet space used and what comes out of the faucet.
Tank systems store water and pour fast. Tankless systems run on a pump and give some cabinet space back.
Countertop units skip plumbing entirely. The iSpring units and both APEC models run on water pressure alone.
The Waterdrop pair needs power. The Aquatic Life unit is for tanks only, and the DREO is for people who cannot touch the plumbing.
iSpring RCC2AK-UV: best for easy install
iSpring RCC2AK-UV: Best for easy install
- 200 GPD RO membrane
- Built-in UV stage
- Up to 3:1 pure to drain
- Patented top-mounted faucet fastener
- Alkaline remineralization stage
A 200 GPD membrane serves large families and offices, while the top-mounted fastener lets you install the faucet from above the sink.
Pros
- Top-mounted fastener installs from above the sink
- 200 GPD suits busy kitchens
- UV stage and alkaline stage included
- Up to 3:1 pure to drain
Cons
- Takes more cabinet height than the 75 GPD iSpring
- Newest model here, without the RCC7AK's longer history
This is the pick for the person who wants the faucet done first and the rest to follow without drama. iSpring's patented top-mounted fastener lets you tighten the faucet from above the counter, so the worst part of a first install goes away. The 200 GPD membrane is the highest output among the tank units here, enough for a large family or an office kitchen where several people fill bottles in the same hour.
A 3:1 pure to drain ratio keeps waste water lower than the older designs that send 3-4 gallons to the drain per gallon made. The 7-stage stack adds a UV stage and an alkaline remineralization stage, so water goes in tasting flat and comes out balanced rather than stripped.
At 15.5 by 5 by 19 inches, it is taller than the 75 GPD iSpring and needs a little more cabinet height. It is also one of the newest models here, so it trades the RCC7AK's longer history for extra output and a UV stage.
Suits busy kitchens that want speed and easy plumbing more than certification paperwork. {{buy B0FM53C6KR}}
iSpring RCC7AK-BN: best for certified filtration
iSpring RCC7AK-BN: Best for certified filtration
- NSF/ANSI 58 certified as a whole system
- 75 GPD membrane
- Alkaline mineral stage
- Transparent first-stage housing
- Runs without electricity
The full system carries NSF/ANSI 58 certification, and the clear first housing shows when the sediment filter needs changing.
Pros
- Whole-system NSF/ANSI 58 certification
- Clear sediment housing for filter checks
- Alkaline stage adds minerals back
- No electricity needed
Cons
- 75 GPD is slower than the 200 GPD iSpring
- Wider cabinet footprint than the RCC2AK-UV
If certification is the deciding factor, this is the unit to buy. The entire system is certified to NSF/ANSI 58, not just the membrane, which means the whole assembly was tested as a package. iSpring lists reductions of 93 to 98% TDS, 95 to 99% chlorine, more than 98.9% lead and more than 97.4% fluoride, plus over 1,000 other contaminants.
The alkaline stage puts minerals back so the water tastes like spring water instead of distilled. The clear first-stage housing is a small but useful touch: you see sediment building up and change that filter before the membrane takes the hit.
At 75 GPD it is slower than the 200 GPD RCC2AK-UV, and its footprint is wider at 16 inches across. It runs on water pressure alone and ships with a brushed nickel faucet, a storage tank and an extra tool set.
For a family that wants documented filtration first and speed second, this is the safer buy. {{buy B005LJ8EXU}}
Aquatic Life RO Buddie: best for aquariums
Aquatic Life RO Buddie 4-Stage Aquarium Water: Best for aquariums
- 50 GPD RO/DI unit
- Color-changing DI resin
- Inline sediment and carbon filters
- Compact body
A deionizing stage after the RO membrane pushes total dissolved solids toward zero, which is what fish tanks and fountains need.
Pros
- DI resin brings TDS near zero
- Resin changes color when spent
- Very compact unit
Cons
- Aquatic Life says it is not for drinking water
- 50 GPD is the lowest output here
This is not a drinking water kit and should not be bought as one. Aquatic Life states plainly that the RO Buddie is for fish tanks, humidifiers and fountains.
What makes it different from the rest of the list is the fourth stage: a color-changing deionizing resin that pulls the remaining total dissolved solids down toward zero. That near-zero TDS matters for sensitive aquatic life and for spot-free rinses, and the resin turns from blue to tan when it is spent so you can see the change without a meter.
Inline sediment and carbon filters handle dirt and chlorine first, though Aquatic Life notes the carbon block will not remove chloramines. The 50 GPD membrane is the lowest output here, and the compact 14 by 4 by 7.5 inch body is small enough to tuck beside a tank or under a utility sink.
Sediment and carbon filters typically last 3 to 6 months and the membrane 1 to 2 years. Buy it for the tank, not the kitchen. {{buy B00204CQF6}}
APEC ROES-50: best value under-sink pick
APEC ROES-50: Best value under-sink pick
- 5-stage filtration
- 50 GPD
- Quick-connect fittings and colored tubing
- Brushed nickel faucet and tank in the box
APEC builds the whole setup around quick-connect fittings and color-matched tubing, so a first install stays simple.
Pros
- Color-coded tubing speeds up a first install
- Slim cabinet footprint
- Faucet and tank included
- APEC has 20 years in water filtration
Cons
- 50 GPD refills the tank slowly for big households
- No mineral stage
APEC has been building water filters for over 20 years, and this unit is aimed at the first-time installer. Quick-connect fittings and color-matched tubing mean you follow the colors and push the lines in, with no guesswork about which tube goes where.
The 5-stage stack removes up to 99.99% of impurities, according to APEC, including arsenic, lead, fluoride and heavy metals, and the kit ships with a brushed nickel faucet, a storage tank and the full install kit. The 50 GPD membrane makes roughly 2 gallons an hour, which is fine for one or two people but shows its limits when a family fills several containers at once.
At 15.5 by 5.25 by 17 inches it is one of the slimmer cabinet bodies here. There is no mineral stage, so the water comes out very pure and slightly flat compared with the iSpring alkaline units.
For a renter or a smaller household that wants proven filtration without a big spend, it is the sensible starting point. {{buy B00I0ZGOZM}}
Waterdrop G3P600: best tankless for counter space
Waterdrop G3P600: Best tankless for counter space
- 600 GPD tankless design
- 8-stage filtration
- 2:1 pure to drain
- Smart display faucet with TDS readout
- Fills an 8 oz cup in 8 seconds
A tankless body frees about 70% of the cabinet, and the smart faucet shows TDS and filter life without opening anything.
Pros
- 600 GPD with no storage tank
- Faucet displays TDS and filter life
- 2:1 pure to drain ratio
- Filters twist out in seconds
Cons
- Needs an electrical outlet under the sink
- Higher upfront cost than tank models here
Tankless is the answer when the cabinet is already full. Waterdrop says the G3P600's body frees about 70% of under-sink space compared with a tank system, and at 600 GPD it makes water on demand instead of storing it.
The smart display faucet shows TDS and filter life, so you know when the water quality shifts without opening the cabinet or hunting for a test strip. It fills an 8 oz cup in about 8 seconds and holds a 2:1 pure to drain ratio.
The 8-stage filtration is certified against NSF/ANSI 58 for TDS reduction and NSF/ANSI 42 for chlorine and taste, with NSF/ANSI 372 for lead-free materials on top. Filters twist out in seconds with no tools.
The catch is the install: it needs an outlet under the sink and two drilled holes, one for the faucet and one for the drain. That makes it more work than the tank units, not less.
Suits a modern kitchen with power already under the counter. {{buy B07P1XFYJP}}
DREO RO Water Filter 112: best countertop option
DREO Reverse Osmosis Water Filter System Countertop: Best countertop option
- Countertop, installation-free body
- 3 L tank plus 1.1 L pitcher
- Real-time TDS monitoring
- Self-cleaning flush
- 3:1 pure to drain
No plumbing and no drilling: the DREO sits on the counter, auto-fills its pitcher and flushes its own lines.
Pros
- No plumbing or cabinet work
- Auto-fill pitcher and self-cleaning
- TDS and filter life on screen
- 3:1 pure to drain
Cons
- 3 L tank suits 1 to 2 people
- Takes counter space a plumbed system would not
This one skips plumbing entirely. The DREO sits on the counter, plugs in and starts making filtered water, so it works in an apartment where you cannot drill a faucet hole or tap the cold line.
The 7-in-1 RO membrane is rated at 0.0001 microns and reduces 99% of lead, chromium, chlorine, PFOS and PFOA plus 97% of fluoride under lab conditions, tested by SGS to NSF/ANSI 58 standards. A 3 L tank feeds a 1.1 L pitcher, and an auto-fill sensor tops the pitcher without you holding it there.
Real-time TDS readouts show both raw and pure water, and a self-cleaning flush keeps the internal lines fresh. The 3:1 pure to drain ratio ties the iSpring RCC2AK-UV for the best ratio on this list.
The trade-off is capacity: 3 liters is built for 1 to 2 people, not a family filling water bottles all day. At 14.5 by 6.7 by 13.4 inches it also claims counter space a plumbed unit would not.
Best for small households with no plumbing options. {{buy B0GHP4KY1Z}}
Express Water RO5DX: best for renters and tight budgets
Express Water RO5DX: Best for renters and tight budgets
- 5-stage under-sink RO
- 50 GPD
- Leak detector included
- Extra filter set in the box
- No electricity needed
Express Water bundles a leak detector and a spare filter set, which lowers what the first year of ownership costs.
Pros
- Leak detector and extra filters included
- Runs on water pressure alone
- Compact cabinet footprint
- 0.8 gpm faucet flow
Cons
- Lower score than the other under-sink tank units here
- 50 GPD and a 4-gallon tank need patience at peak use
The value here is in the box. Express Water includes a leak detector and an extra filter set with the system, which takes some of the cost and worry out of the first year.
The leak detector is a small thing until a fitting drips behind the cabinet, and the spare filters mean you are not buying replacements right after install. The 5-stage stack reduces up to 99.99% of lead, chlorine, fluoride and PFAS/PFOs, per Express Water, and it runs on water pressure alone with no electricity.
The faucet delivers 0.8 gpm, a fast pour for a 50 GPD unit. The 4-gallon tank holds 3.2 gallons of usable water.
The downsides are real: 50 GPD is slow to refill at peak use, and its operating range tops out at 300 ppm TDS on the input side. The 14 by 5 by 15 inch body is the most compact under-sink tank unit here.
Suits renters who want a complete kit and a leak safeguard without paying for certification paperwork. {{buy B00J2DGTD8}}
Waterdrop G2: best small tankless system
Waterdrop G2: Best small tankless system
- 400 GPD tankless body
- 7-stage filtration
- 1:1 pure to drain
- Twist-and-pull filters
- Fills a cup in about 12 seconds
The G2 gives tankless speed and a slim cabinet profile with a mechanical faucet and a simpler feature set than the G3P600.
Pros
- Tankless design frees cabinet space
- Filter swaps take about 3 seconds
- 1:1 pure to drain
- NSF/ANSI 372 certified for lead-free materials
Cons
- 1:1 drain ratio wastes more water than the G3P600
- Needs an outlet and drilled holes
The G2 is the simpler sibling of the G3P600. It runs 400 GPD tankless and fills a cup in about 12 seconds, slower than the G3P600 but still steady and on demand.
The 7-stage filtration uses a composite filter, and the unit is certified to NSF/ANSI 372 for lead-free materials. Its 1:1 pure to drain ratio is the weak spot: it sends one cup to the drain for every cup made, where the G3P600 manages 2:1 and the iSpring and DREO units reach 3:1.
Over a year that adds up. The tankless body frees cabinet space and the filters twist and pull out in about 3 seconds.
It ships with a mechanical faucet rather than a display, so no TDS readout. Like the G3P600 it needs an outlet and drilled holes.
At 17.3 by 5.9 by 14 inches it is a bit shorter and deeper than the G3P600. Suits a small kitchen that wants tankless convenience and can live with the drain ratio. {{buy B082CZ9XZ9}}
APEC RO-90: best for high output tank users
APEC RO-90: Best for high output tank users
- 90 GPD output
- 5-stage filtration
- Super-capacity filters last twice as long as smaller ones, APEC says
- WQA Gold Seal certified
APEC pairs a 90 GPD membrane with larger filter cartridges, so the tank refills faster and filter changes come less often.
Pros
- 90 GPD fills the tank faster than 50 GPD units
- Super-capacity filters cut change-outs
- WQA Gold Seal certified
- JG quick-connect fittings
Cons
- Pricier than the ROES-50 with a similar layout
- No mineral stage
This is the tank system for someone who wants more speed but still refuses to wire an outlet. The 90 GPD membrane fills the storage tank faster than the 50 GPD APEC ROES-50, so a busy morning drains it less often.
APEC's super-capacity filters are built to last about twice as long as the smaller all-in-one cartridges, which means fewer change-outs and less time on your knees. The system carries WQA Gold Seal certification, tested to remove up to 99% of contaminants including arsenic, chlorine, lead, fluoride and heavy metals.
It uses JG quick-connect fittings and food-grade tubing for leak-resistant seals. The faucet is lead-free chrome.
The layout is similar to the ROES-50, so you pay more for output and filter life rather than a different design. There is no mineral stage, so taste stays very pure.
Suits a larger household that wants tank speed without electricity and does not mind the price step up. {{buy B00HRHHFPW}}
How these DIY systems were compared
We set out to find systems suited to a specific home need, so install difficulty carried as much weight as water quality. The score weighs specs, features and buyer feedback against what you're shopping for.
First, the install path. A top-mounted fastener that tightens from above the counter saves the worst part of the job, so it moves a system up the list.
Push-to-connect fittings and color-coded tubing do the same. Needing an outlet or drilling a second hole counts against a unit for a first-timer.
Then output and drain ratio. A 50 GPD membrane means a slower refill when two people want water at once, while 200 to 600 GPD keeps up with a full kitchen.
A 1:1 drain ratio wastes more water than 3:1, and the difference is easy to underestimate over a year. Filter stages came next.
Mineral and UV stages change taste and peace of mind, and a deionizing stage is the only way to get near-zero TDS for a fish tank. Certification matters too: whole-system NSF/ANSI 58 and WQA Gold Seal mean the assembly was tested, not just one part.
Finally, the practical bits: cabinet footprint, whether the unit needs an outlet, and how quickly filters swap out. Read our reverse osmosis buying guide for the home kitchen for the wider picture beyond these nine.
| Product | Best for | Capacity | Size (L x W x H) | Installation | Our score |
|---|---|---|---|---|---|
| iSpring RCC2AK-UV | easy install | 200 gallons per day | 15.5 x 5 x 19 in | Under sink | 9.7 |
| iSpring RCC7AK-BN | certified filtration | 75 gallons per day | 15.5 x 16 x 18 in | Under sink | 9.1 |
| Aquatic Life RO Buddie 4-Stage Aquarium Water | aquariums | 50 gallons per day | Inline, compact | 9.0 | |
| APEC ROES-50 | value under-sink pick | 50 gallons per day | 15.5 x 5.25 x 17 in | Under sink | 8.9 |
| Waterdrop G3P600 | tankless for counter space | 600 gallons per day | 18.12 x 5.67 x 17.72 in | Under sink, needs an outlet | 8.8 |
| DREO Reverse Osmosis Water Filter System Countertop | countertop option | 3 liters | 14.5 x 6.7 x 13.4 in | Countertop | 8.5 |
| Express Water RO5DX | renters and tight budgets | 50 gallons per day | 14 x 5 x 15 in | Under sink | 7.8 |
| Waterdrop G2 | small tankless system | 400 gallons per day | 17.3 x 5.9 x 14 in | Under sink, needs an outlet | 7.7 |
| APEC RO-90 | high output tank users | 90 gallons per day | 16 x 5.25 x 17.5 in | Under sink | 7.6 |
Can you install a DIY reverse osmosis system with no plumbing experience?
Yes, if you can turn a wrench and drill one hole. Most under-sink kits here include a feed water adapter, a drain saddle and push-to-connect tubing.
The two iSpring units make it easier. The RCC2AK-UV and RCC7AK-BN both use a patented top-mounted fastener, which means the faucet nut gets tightened from above the sink.
Budget an afternoon, and check that your cold water shutoff valve turns freely before you start. If you rent and cannot drill, the DREO countertop unit needs no plumbing at all: fill its 3 L tank from the tap and let it work.
What tools does the job need?
A drill with a hole saw for the faucet, a wrench, a bucket and a towel cover most of it. The iSpring RCC7AK-BN ships with an extra tool set.
The drain saddle clamps to the sink's drain pipe or the garbage disposal tailpiece, tightened above the trap so waste water runs downhill.
How much water output do you need from a DIY RO system?
Choose 50 to 75 GPD for one or two people, and 90 GPD or more for a busy family. Output controls how fast the storage tank refills after a heavy draw.
A 50 GPD system like the APEC ROES-50 or Express Water RO5DX makes about 2 gallons an hour. A family filling a coffee pot, a stock pot and water bottles in the same morning will notice the wait.
The iSpring RCC2AK-UV solves that with 200 GPD. The APEC RO-90 sits in between at 90 GPD, and Waterdrop's tankless units skip the tank question with 400 and 600 GPD.
Your water pressure matters as much as the number on the box. Most of these units want 40 to 85 psi to hit their rated output.
How does the pure to drain ratio affect waste?
Every RO membrane flushes some water to the drain to carry away the concentrated contaminants. An older 1:1 design sends one gallon down the drain for every gallon made.
The Waterdrop G2 sits at 1:1. The G3P600 reaches 2:1, and the iSpring RCC2AK-UV and DREO hit 3:1.
On a busy kitchen the 3:1 units waste noticeably less water over a year.
Should you pick a tank or tankless DIY reverse osmosis system?
Pick a tank system for simple installs without an outlet, and a tankless unit when cabinet room is tight. Both make clean water, and the choice comes down to your space and your wiring.
Tank systems: no power, steady pour
A tank holds several gallons, so the faucet pours at full speed every time. No electricity is involved, which keeps the install simpler and leaves one less part to break.
The trade-off is cabinet space. A tank is roughly 11 inches wide and 15 inches tall, and it has to sit beside the filter body.
The Express Water tank is a 4-gallon model with 3.2 gallons usable.
Tankless systems: more room, more setup
Tankless units hang flat against the cabinet wall. Waterdrop says the G3P600's tankless body frees about 70% of the under-sink space.
You pay for that in setup. Both Waterdrop units need an outlet, and you will drill two holes instead of one.
Flow is steady and quick: the G3P600 fills an 8 oz cup in 8 seconds. There is also no stored water to run out mid-pour.
What should you check before buying a DIY RO system?
Check your sink top for an open hole, your cabinet for room and your water pressure before you order. These three things decide whether install day is short or frustrating.
Most kits ask for a 1-inch faucet hole. If your sink has a soap dispenser or a sprayer you don't use, one of those holes may fit.
Then measure the cabinet against the system's width, depth and height, and leave room around the tank for the lines. If your home runs low pressure, a booster pump keeps output on target.
APEC's units list a 40 to 85 psi range and Express Water runs 40 to 80 psi.
Do you need to check your input water quality?
Yes, and more people skip this than any other step. Express Water lists a 300 ppm maximum TDS on its input side, and the DREO tops out at 500 ppm.
If your tap water tests well above that, a system rated for it is the safer buy. A cheap TDS pen answers the question in seconds.
The DREO's 3 L tank and 1.1 L pitcher suit 1 to 2 people, and its self-cleaning flush keeps the internal lines fresh, though it still needs a nearby outlet.
What changes with an aquarium or a low-salt diet?
Two use cases push you past a standard drinking water kit: a fish tank and a need for near-zero TDS. Each has its own best match in this group.
Aquarium water needs a deionizing stage
A standard RO membrane still leaves a little behind. The Aquatic Life RO Buddie adds a DI resin stage after the membrane, and the resin changes from blue to tan when it's spent.
Aquatic Life states the unit is not for drinking water. Keep it as a dedicated fish tank and fountain filter.
A drinking water system with a remineralization stage, like the two iSpring units, is the opposite tool: it puts minerals back in, which is not what a reef tank wants. For nitrate concerns, compare membranes and stages in our guide to a reverse osmosis system for nitrates before you decide.
Our roundup of the best reverse osmosis system under 300 covers the lower-priced end.
How long will your DIY reverse osmosis system last?
Plan on 10 to 15 years for the housing and tank, with filters and membranes replaced along the way. The membrane is the part that decides most of that life.
Sediment and carbon filters typically run 3 to 6 months in a standard kit, and the RO membrane lasts 1 to 2 years depending on use. iSpring sells replacement sets as F4AK for 6 months and F9K for a year.
The iSpring RCC7AK-BN ships with a clear first-stage housing, so you can see sediment buildup and swap that filter on time. Express Water includes a leak detector, which catches a loose fitting before it damages the cabinet floor.
APEC's super-capacity filters on the RO-90 are built to stretch change-outs to about twice the usual interval. Our guide to how long do reverse osmosis systems last breaks down each part.
Verdict: which best DIY reverse osmosis system should you buy?
The best DIY reverse osmosis system for most homes is still the iSpring RCC2AK-UV, because it pairs the easiest faucet install in this group with 200 GPD, a UV stage and a 3:1 pure to drain ratio. You get fast water and clean, balanced taste without an electrician.
Buy the iSpring RCC7AK-BN instead if whole-system NSF/ANSI 58 certification is your priority. Take the Aquatic Life RO Buddie for a fish tank, or the DREO if you can't touch the plumbing at all.
Waterdrop's tankless pair is the move when cabinet storage matters more than a simple install. The APEC RO-90 is the tank pick for a larger household that wants speed without wiring, and the Express Water RO5DX is the low-cost kit with a leak detector and spare filters in the box.
Our top 3 picks at a glance
Frequently asked questions
Can I install a reverse osmosis system myself?
Yes. Every under-sink system here uses push-to-connect fittings, and the two iSpring units add a fastener you tighten from above the sink.
Plan for about two hours if you are drilling a faucet hole for the first time.
Do DIY reverse osmosis systems need electricity?
Tank systems like the iSpring, APEC and Express Water models run on water pressure alone. The Waterdrop G3P600 and G2 are tankless and need an outlet under the sink to run their pumps.
What is the difference between a tank and a tankless RO system?
A tank stores purified water so the faucet pours at full speed right away. A tankless unit makes water on demand, saves cabinet space and needs power, but its flow depends on the pump.
How much water does a DIY RO system waste?
Older designs send 3 or 4 gallons to the drain per gallon made. The iSpring RCC2AK-UV reaches 3:1 pure to drain, the DREO and Waterdrop units hit 2:1 or 3:1, and the Waterdrop G2 sits at 1:1.
Can I use an RO system for a fish tank or a fridge?
Aquarium use needs a deionizing stage, which the Aquatic Life RO Buddie has. For a fridge, the iSpring RCC7AK-BN works with most fridges when you add iSpring's ice maker kit.
About this guide: Our look at best DIY reverse osmosis systems draws on maker specs, materials and what owners report. See how we research.



